LH Hydraulic Lift Arm D0NN555C Fits Ford Tractor 2000 2100 2300 2600 3000 3100 3600

Models This Part Fits:

621 (W/ 4 CYL, 3000 (1965 To 1981), 4110V (W/ 3 CYL, 530A, 3400, 2150 (W/ 3 CYL, 1821, 640, 861, 5/83-2/90), 3100, 4110O (W/ 3 CYL, 1881, 1/83-2/84), 1/75-12/81), 4120, 800 SERIES (1955 To 1964), 950, 10/75-9/76), 3610, 4100, 820, 3910N (W/ 3 CYL, 3910R (W/ 3 CYL, 2100, 335 (W/ 3 CYL, 1/57-12/62), 4140, 3120, 2121, 4131 (W/ 4 CYL, 3300, 641 (W/ 4 CYL, 4110 (W/ 3 CYL, 961, 2610, 2000 (1965 To 1981), 4110N (W/ 3 CYL, 233 (W/ 3 CYL, 233, 3600 (1965 To 1981), 2120 (W/ 3 CYL, 1/75-12/77), 650, 871, 700, 2610 (W/ 3 CYL, 2131 (W/ 4 CYL, 840, 3610N (W/ 3 CYL, 941, 661, 1/70-12/74, 3110, 230A, 1/59-12/63), 3910, 1/83-2/90), 651, 3330, 12/81-2/90), 4610O (W/ 3 CYL, 3/65-12/74), 821, 1/56-12/57), 771, 501, 2031, 231, 4130 4 cylinder, 2030, 681, 4031 (W/ 4 CYL, 621, 501 (W/ 4 CYL, 4610NO (W/ 3 CYL, 12/83-2/90), 1/81-4/83), 801, 2300 (W/ 3 CYL, 2131, 1841, 2300, 2130, 4131, 2120 (W/ 4 CYL, 3600, 1/57-12/57), 2100 (W/ 3 CYL, 2000 4 cylinder, 630 (W/ 4 CYL, 2110 (W/ 3 CYL, 334 (W/ 3 CYL, 1/81-12/84), 1811, 631 (W/ 4 CYL, 620 (W/ 4 CYL, 631, 2810 (W/ 3 CYL, 600, 4110, 701, 531, 1/63-12/64), 860, 901, 800, 960, 600 (W/ 4 CYL, 651 (W/ 4 CYL, 4030, 3/82-12/83), 1/59-12/64), 4110NO (W/ 3 CYL, 881, 1/75-7/81), 640 (W/ 4 CYL, 4120 (W/ 4 CYL, 851, 3000, 951, 1/65-12/74), 4600SU (W/ 3 CYL, 2600, 600 SERIES (1955 To 1964), 601 (W/ 4 CYL, 2000 3 cylinder, 3910 (W/ 3 CYL, 2600V (W/ 3 CYL, 3600N (W/ 3 CYL, 971, 740, 2600 (1965 To 1981), 3500 (W/ 3 CYL, 641, 1801, U.K. Only), 333 (W/ 3 CYL, 3600V (W/ 3 CYL, 2600R (W/ 3 CYL, 2310 (W/ 3 CYL, 4121, 2111, 611, 4030 4 cylinder, 230A (W/ 3 CYL, 3910V (W/ 3 CYL, 981, 2910, 4610N (W/ 3 CYL, 811, 2910 (W/ 3 CYL, 741, 541, 620, 1871, 4031, 671, 611 (W/ 4 CYL, 1/58-12/64), 650 (W/ 4 CYL, 841, 4000, 335, 660 (W/ 4 CYL, 630, 1/55-12/57), 4130, 2600N (W/ 3 CYL, 660, 531 (W/ 3 CYL, 2810, 850, 333, 334, 1/54-12/64), 4040, 900, 3910H (W/ 3 CYL, 4000 4 cylinder, 1/81-2/90), 1/60-12/62), 3600R (W/ 3 CYL, 231 (W/ 3 CYL, 601, 2031 (W/ 4 CYL

Additional Information:

Category 1 Accommodates 7/8" drawbar or lower link pins 31-5/8" center to center on the ball Left hand side Offset tractors must drill hole for sway chain The arm is 1/2" thick and at widest point is 3" wide

Reference Numbers:

AMD0NN555C, D0NN555CLH, D0NN555C