A-B1314441GS-AI PUMP

One New Aftermarket Replacement High-Pressure Pump Fits Briggs & Fits Stratton Pressure Washers

This aftermarket replacement pump Fits Briggs & Fits Stratton (and Fits Briggs and Stratton) pressure washers and is compatible with select Fits Craftsman, Fits generac, and Troy-Bilt pressure washer units. It is an oil-filled axial cam direct-drive pump designed for consumer-series pressure washers with a vertical 7/8" engine shaft. The pump includes a three-leg vertical gas engine flange, built-in pressure control valve, chemical injection system, EZ start valve, and a 22mm-14 twist connect outlet tube with rear-facing inlet and outlet tubes. If your current pump's inlet and outlet tubes face the same direction as the engine spark plug, verify you need this rear-facing configuration before ordering. Units equipped with auto idle must transfer the auto idle cable and fitting from the old pump to the new pump.

Specifications

• Type: Oil-filled axial cam direct-drive pump
• Max Flow: 2.3 GPM (8.3 L/min)
• Max Pressure: 2700 PSI (173 bar) at 3400 RPM
• Minimum Engine Power: 4.3-4.5 HP
• Shaft Fit: 7/8" vertical hollow shaft
• Outlet: 22mm-14 twist connect, rear-facing
• Bore Diameter: 12 mm
• Stroke: 9.7 mm
• Weight: 8.0 lbs
• Crankshaft ID Stamp: 1

Compatible With

Fits Briggs & Fits Stratton / Fits Craftsman: Select pressure washer models using the 314441GS pump

Also fits select pressure washers from: Fits generac, Troy-Bilt

Replaces Part Number(s):

314441GS, B1314441GS, 314441GSRC, 202274GS, 202303GS

New aftermarket replacement part - not remanufactured, not used.