5194160- Fits Case CNH - BUSHING - GOOD DEAL

One New Aftermarket Replacement MFWD Swivel Housing Bushing for Case / Case IH / New Holland Equipment

This aftermarket replacement bushing fits the MFWD (mechanical front-wheel drive) swivel housing and front axle end on a wide range of Case backhoe loaders, landscapers, forklifts, and Case IH and New Holland tractors. Dimensioned at 30.05mm ID x 34.12mm OD x 30mm long, it seats in the front and rear axle housing to maintain proper spindle alignment and reduce wear under load.

Specifications

• Inner Diameter: 30.05mm
• Outer Diameter: 34.12mm
• Length: 30mm
• Application: MFWD swivel housing / front axle end - outer bushing

Compatible Models

Case Backhoe Loaders: 580L, 580 Super L, 580SL, 580SL Series II, 580M, 580 Super M, 580SM, 580SM Series II, 580SM Series III, 580SM+ Series II, 580SM+ Series III, 580N

Case Landscapers / Loader Landscapers: 570LXT, 570LXT Series II, 570MXT, 570MXT Series III, 570NXT Tier 4A

Case Trenchers: 560, 660

Case Rough Terrain Forklifts: 585G, 586G, 586G Series III, 586H Tier 4A, 588G, 588G Series III, 588H Tier 4A

Case IH Tractors: C50, C60, C70, C80, C90, C100, CX50, CX60, CX70, CX80, CX90, CX100, JX1070N, JX1075N, JX1095N, MX80C, MX90C, MX100C, 395, 495, 595, 695, 895, 995, FARMALL 75N, FARMALL 85N, FARMALL 95N, FARMALL 105N, FARMALL 105V, 3220, 3230, 4210, 4230, 4240, 2120 (Narrow, s/n CGC2829 and earlier), 2130 (Narrow, s/n CGC2829 and earlier), 2140 (Narrow, s/n CGC2829 and earlier), 2150 (Narrow, s/n CGC2829 and earlier)

New Holland Tractors: 3230, 3430, 3930, 3930H, 3930N, 4130, 4130N, 4130NO, 4630, 4630N, 4630NO, 4630O, 4830, 4830N, 4830O, 5030, 5030O, T4020V, T4030N, T4030V, T4040N, T4040V, T4050N, T4050V, T4060N, T4060V, T4.65V, T4.75V, T4.85V, T4.95V, T4.105V, TN60VA, TN65V, TN70VA, TN75V, TN75VA, TN95NA, TN95VA, LB110, LB110B, LB115

Ford Tractors: 3230, 3430, 3930, 4130, 4630, 4830, 5030

Replaces Part Number(s):

5194160, 5194160-A, 1966186C1, 83983500, 85805969, 2026022, 73403994, 9967675, CAR118504, 1-33-741-607

Aftermarket Interchange Numbers

Carraro manufacturer number: 118504

New aftermarket replacement part - not remanufactured, not used.