48A27 PTO Overrunning Coupler 1-1/8 to 1-3/8 6 Spline Fits Ford 8N 9N NAA
48A27 PTO Overrunning Coupler 1-1/8 to 1-3/8 6 Spline Fits Ford 8N 9N NAA
Regular price
$144.00 AUD
Regular price
Sale price
$144.00 AUD
Unit price
per
Shipping calculated at checkout.
Couldn't load pickup availability
One new aftermarket PTO overrunning coupler.
An overrunning coupler is a one way device that lets a high inertia implement, such as a rotary cutter, coast to a stop instead of driving the tractor forward through the power take off when you disengage. It is a safety part, so do not run a heavy rotary implement without one.
The female end is 1 1/8 inch six spline and slides onto the tractor shaft; the male end is 1 3/8 inch six spline for the implement, so it also steps the size up. It is rated to about 75 horsepower on a 540 or 1000 rpm shaft, is about 6 1/2 inch long, is held by a cross pin, and has a grease fitting and spring loaded internal keys.
Check your tractor shaft first. If your tractor already has a 1 3/8 inch power take off, this is not the right coupler. Made to fit Ford 2N, 8N, 9N and the NAA and Jubilee, and Made to Fit Ferguson TE20 and TO20 tractors, which use the 1 1/8 inch six spline shaft. It crosses to 48A27 and A&I A-48A27.
View full details
An overrunning coupler is a one way device that lets a high inertia implement, such as a rotary cutter, coast to a stop instead of driving the tractor forward through the power take off when you disengage. It is a safety part, so do not run a heavy rotary implement without one.
The female end is 1 1/8 inch six spline and slides onto the tractor shaft; the male end is 1 3/8 inch six spline for the implement, so it also steps the size up. It is rated to about 75 horsepower on a 540 or 1000 rpm shaft, is about 6 1/2 inch long, is held by a cross pin, and has a grease fitting and spring loaded internal keys.
Check your tractor shaft first. If your tractor already has a 1 3/8 inch power take off, this is not the right coupler. Made to fit Ford 2N, 8N, 9N and the NAA and Jubilee, and Made to Fit Ferguson TE20 and TO20 tractors, which use the 1 1/8 inch six spline shaft. It crosses to 48A27 and A&I A-48A27.
